Stage 3 includes 3.0 remote res coilovers for 1.25-3.25” of lift, max performance and 35” tire fitment. Billet UCAs, links, rear coils, track bar and 3.0 Series remote res shocks balance shock damping. CDXS for damping adjustment.
Rounding out the Stage 3 suspension system are 3.0 Series rear remote reservoir shocks specially tailored for the 2022-2026 Tundra to yield a 20% increase in wheel travel over stock. 3.0 Series shocks also boast 50% more piston surface area compared to 2.5 Series shocks, offering outstanding performance off-road and a smooth ride on the street. Increased internal oil volume and more external surface area compared to 2.5 Series Shocks, plus their remote reservoirs, offer even greater heat dissipation and resistance to shock fade under hard use. Also equipped with CDXS, these offer 10 settings of low and high speed compression damping adjustment from soft to hard. Their pairing with the ICON V.S. 3.0 Series CDXS front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Tundra.
- Vehicle specific design for 2022-2026 Toyota Tundra
- UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation
- Included sway bar drop brackets reduce bind in OE sway bar links
- Allows for up to 40% increase in front wheel travel over stock without overstressing OE components
- Billet rear upper and lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment
- Triple rate rear coil springs improve performance and ride quality while providing .5" of rear lift (non-TRD models)
- On-vehicle adjustable rear track bar properly centers rear axle while also improve rear suspension performance
- 3.0 Series rear remote reservoir shocks provide maximum performance, 20% increase in wheel travel, and balanced tune with coilovers
- All ICON shock absorbers are fully rebuildable and re-tunable
- 3.0 Series front coilovers with ICON’s multi-stage, tunable hydraulic “Bump Zone”
- Adjustable front ride heights from 1.25-3.25” of front lift over stock when used with included billet aluminum UCAs
- All shock absorbers equipped with ICON CDXS for independent adjustability of high speed and low speed compression force for handling response and aggressiveness
- Billet aluminum UCAs for added strength, durability, and on-vehicle caster/camber adjustment for optimum drivability
Information:
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.75” Backspace / 25mm Offset
Application Summary:
| Year |
Make/Model |
| 2022-2026 |
Toyota Tundra |
| Attributes |
| AAP_UDA_12 |
EA |
| AAP_UDA_22 |
1 |
| AAP_UDA_4 |
55 |
| Active or Passive Suspension |
Passive |
| Add-On Part |
56113 - 22-25 TUNDRA/23-24 SEQUOIA FRONT FOAM BUMP STOP KIT, 252012 - -4 TO -10 HOSE SHIELD KIT |
| Adjustable Compression |
Yes |
| Adjustable Control Arm |
Yes |
| Adjustable Damping |
Yes |
| Adjustable Rebound |
No |
| Bushings Included |
Yes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Coil Quantity Front |
2 |
| Coil Spring Color |
Black |
| Coil Spring End 1 Type |
Closed, Closed |
| Coil Spring End 2 Type |
Closed, Closed |
| Coil Spring Material |
Steel |
| Coil Spring Maximum Inside Diameter |
3.625 |
| Coils Quantity Front |
2, 2 |
| Coils Quantity Rear |
2, 2 |
| Country of Origin (Primary) |
US |
| Damping Adjustment Type |
Dual Speed Manual, Dual Speed Manual |
| Front Reservoir Style |
Remote, Remote |
| Front Shock Body Diameter |
3, 3 |
| Front Spring Rate Type |
Linear, Linear |
| Grade Type |
Performance, Performance |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| Maximum Lift |
3.25, 3.25 |
| Maximum Lift Front |
3.25, 3.25 |
| Maximum Lift Rear |
.5, .5 |
| Minimum Lift Front |
.75, .75 |
| Mounting Hardware Included |
Yes, Yes |
| NAFTA Preference Criterion Code |
C |
| Rear Reservoir Style |
Remote, Remote |
| Rear Shock Body Diameter |
3, 3 |
| Rear Spring Rate |
330, 120 |
| Rear Spring Rate Type |
Progressive Triple Rate, Progressive Triple Rate |
| Reservoir Style |
Remote, Remote |
| SDR Required Flag |
N |
| Shocks Included |
Yes, Yes |
| Spring Color |
Black, Black |
| Spring Material |
Steel, Steel |
| GTIN |
00840103433189 |
